Bien tan Emerson SK|Bán Biến tần Emerson Commander SK

Biến tần Emerson Commander SK Series là dòng biến tần thông dụng,tương thích với rất nhiều trong thực tế với nhiều tính năng điều khiển thông minh, truyền thông mạnh mẽ. Commander SK sẽ vượt ngoài sự mong đợi của Quý khách hàng.

Biến tần Emerson Commander SK

Thông số kỹ thuật Biến tần Emerson SK

0.25kW – 132kW (0.33hp – 200hp)

100V / 200V / 400V / 575V / 690V

>>>Download User manual Commander SK

Commander SK is easy to use and offers great value. The drive modules are compact and offer excellent motor control. With onboard intelligence, I/O, Ethernet and fieldbus communications options, Commander SK allows you to do far more than you would expect from a standard open loop drive.

• Automatic no-spin autotune for rapid performance optimization
• 8 preset speeds available for greater application flexibility
• Keypad access to all parameters – basic and advanced menus
• Open loop vector control. Speed or Torque control
• Speed reference input: 0-10V, 0-20mA, 4-20mA (-10V to +10V SM-I/O Lite option)
• Switching frequency from 3kHz up to 18kHz – quiet motor operation
• Output frequency from 0 to 1500 Hz
• Linear and S type acceleration and deceleration ramps
• Modbus RTU RS485 via RJ45 connector as standard
• DC injection braking as standard
• Dynamic braking transistor as standard
• Energy savings with dynamic motor flux V/Hz
• Fan and pump energy optimization with quadratic motor flux V/Hz
• Advanced standard software features, such as timers,thresholds, maths blocks, logic operators, PID controller and kW/h meter

Inputs and outputs*

Standard Inputs and Outputs	I/O Default Function	Rating	Quantity
Digital Inputs	Enable / ResetRun Forwards Run Reverse Local Remote Speed Reference	24V	4
Digital Outputs	Zero Speed	24V	1
Relay Outputs	Drive Healthy	Normally open contact	1
Analog Input 1	Local Speed Reference	0 – 10V	1
Analog Input 2	Remote Speed Reference	0-20mA or 4-20mA	1
Analog Output	Motor Speed	0 – 10V	1

* I/O functions shown are default European settings, other functions are configurable. I/O can be expanded through option modules.

Environmental safety and electrical conformance

• IP20 (NEMA 1)
• Conduit kits available for wall mounting
• Ambient temperature -10°C to 40°C
• Electromagnetic Immunity complies with EN61800-3, EN61000-6-1 and EN61000-6-2
• Humidity 95% maximum (non-condensing)
• Electromagnetic Emissions complies with EN61800-3 (second environment) as standard. Complies with EN61000-6-3 (residential) and EN61000-6-4 (industrial) generic standards with optional footprint EMC filter

Biến tần Emerson Affinity cho Bơm, Quạt, HVAC| Bán Biến tần Emerson| Sửa biến tần Emerson

Biến tần Emerson| Cung cấp biến tần EMERSON| Ban bien tan Emerson| Sua bien tan Emerson| Biến tần cho Bơm, Quạt và HVAC

Biến tần Emerson cho HVAC

Thông số kỹ thuật biến tần Emerson:

Affinity – HVAC and Refrigeration Drives

1.1kW – 132kW (1.5hp – 200hp)

200V / 400V / 575V / 690V

>>> DOWNLOAD USER MANUAL AFFINITY

Affinity is Control Techniques’ dedicated AC Drive for HVAC and refrigeration systems, designed specifically to meet the needs of consultants, contractors and owners of modern commercial buildings. Affinity offers all of the drive functionality and accessories to simply and efficiently solve your fan, pump and compressor applications. Affinity is available with IP21 (NEMA 1) and IP54 (NEMA 4) environmental protection.

A complete HVAC solution
Affinity includes all of the features you would expect from a dedicated HVAC drive, plus more:

*Fireman’s Mode for building occupant safety
*Integrated DC Link Reactors and EMC filters
*Free software tools for:
*Energy saving calculations
*Harmonic analysis
*Commissioning and monitoring
*Onboard controller and real-time clock,
*Enables increased control system redundancy for critical equipment
*Reduces costs for OEMs
*Simplicity in small HVAC systems where a full Building Management System is not required
*Motor pre-heat for preventing condensation forming
*High Switching frequency to 16kHz for quiet motor operation
*Two PID loops (e.g. temperature or pressure control)
*Sleep / wake mode
*SmartCard data storage for back-up and copying of drive configuration
*Pluggable terminals for simple installation and maintenance
*Low load detection to sense mechanical problems such as a broken drive belt
*Easy connectivity: BACnet , Metasys N2, Modbus, Lonworks*, Ethernet*, DeviceNet*, PROFIBUS*, Additional I/O*

*These features are provided by click-in option modules

Bien tan Emerson PV|Bán Biến tần Emerson PV Series|Sửa biến tần Emerson

Biến tần Emerson Commander SX| Cung cap bien tan Emerson| Sua bien tan Emerson| Tài liệu Biến tần Emerson Tiếng Việt|

Bộ biến tần PV Series là một sản phẩm của tập đoàn Emerson (USA)- Chuyên dùng cho Bơm, Quạt gió , điều khiển động cơ xoay chiều 3 pha 380V, công suất từ 5.5KW đến 110KW.

Biến tần Emerson PV

Ưu điểm nổi bật :

* Tiết kiệm năng lượng tối đa nhờ khả năng thay đổi đặc tính V/F theo tải.

* Động cơ vận hành êm hơn với tần số đóng ngắt cao tới 15 KHz.

* Tích hợp sẵn bộ điều khiển PI cho các ứng dụng tự động duy trì lưu lượng, áp suất…

* Có sẵn cổng truyền thông RS232 và RS485.

* Bàn phím lập trình và hiển thị có thể tháo lắp và đưa ra xa.

Các ứng dụng chính :
* Máy đùn nhựa, cao su,  Máy bọc dây cáp điện,  Hệ thống bơm và quạt gió HVAC,  Băng tải hàng,  Công nghiệp dệt.

>>> DOWNLOAD TÀI LIỆU BIẾN TẦN EMERSON TIẾNG VIỆT

Biến tần Emerson Unidrive SP|Bien tan Emerson Unidrive SP|Tài liệu Biến tần Emerson Unidrive SP

Biến tần Emerson Unidrive SP|Cung cap Bien tan Emerson Unidrive SP|Tài liệu Biến tần Emerson Unidrive SP| Ban bien tan Emerson| Sua bien tan Emerson

Bien tan Emerson Unidrive SP

Thông số kỹ thuật Biến tần Emerson Unidrive SP:

Công suất:

0.37kW – 132kW (0.5hp – 200hp)

200V / 400V / 575V / 690V

>>> DOWNLOAD USER MANUAL INVERTER EMERSON UNIDRIVE SP

Unidrive SP Panel Mount are standard AC input, AC output drives for installation within a control panel. The drives are easy to install and commission and can be applied in a wide range of applications. Unidrive SP can be configured to operate in the following modes:

• Open loop V/Hz AC drive
• Open loop Vector AC drive
• Open loop Rotor Flux Control (RFC)
• Closed loop Vector AC drive
• Servo for synchronous permanent magnet motors / brushless servo motors

Widest range of system integration features

Unidrive SP offers the widest range of system integration features, each drive can accept three option modules, allowing you to select the level of integrated automation / motion control, connectivity and I/O that you need. Click on the options tab for more information.

High performance motor control

Unidrive SP is applied in the most demanding applications, where dynamic, high performance motor control is required, from precision automotive test stands to high speed manufacturing machinery.

Back-up power supplies for continuous operation

Back-up power supplies ensure  the drives are always ready for action, eliminating start-up routines and providing safety back-up for critical equipment.

• 24Vdc input for control – Allows the control circuits of Unidrive SP to remain active when the AC supply is removed. This enables fieldbus modules, application modules and encoders to continue to operate.
• 48-96Vdc input  for power – Allows the drives power output to control the motor, often used for emergency back-up situations such as for moving elevators to an exit during a power supply failure.

Flexible power systems – lower harmonics

In applications where there is a significant amount of stored mechanical energy, the drive must be able to transfer the energy from the mechanical system to control the motor speed. Unidrive SP can be used to return excess energy to a shared DC bus or to the AC supply. Benefits include:

• Energy saving
• Sinusoidal input current (low harmonic content)
• Unity or controllable input power factor

On-Board PLC

Unidrive SP has an inbuilt programmable controller. It is configured using an easy-to-use ladder logic program editor, suitable for replacing relay logic or a micro PLC for simple drive control applications.

Easy Parameter Back-up and Copy

The Smartcard is a memory device that is supplied with every Unidrive SP, it can be used to back-up parameter sets and PLC programs and copy them from one drive to another.

• Parameter and program storage
• Simplify drive maintenance and commissioning
• Quick set-up for sequential build of machines
• Machine upgrades can be stored on a Smartcard and sent to the customer for installation

Integrated brake resistors

Unidrive SP frame sizes 0 to 2 feature an optional heatsink mounted brake resistor. This arrangement simplifies installation, requires no additional space and is self fusing with additional overload protection offered by the drive.

Flexible mounting

Unidrive SP panel mount drives can be surface mounted or the heatsink through panel mounted, allowing the heat to be dissipated externally. This reduces the temperature rise inside the control panel. An IP54 (NEMA 12) mounting kit is included with the drive as standard and IP54 (NEMA 12) versions of the heatsink fan are available as an option. This mounting method allows smaller enclosure dimensions and reduces the need for ventilation.

Safety as standard

Unidrive SP’s Safe Torque Off (STO) is a functional safety feature which complies with EN/IEC 61800-5-2 SIL 3 and is built in to the drive as standard. When the Safe Torque Off function is active, the drive output is disabled with a high degree of integrity.

• Certified by BGIA and TÜV
• Allows the drive to become part of the machine safety system
• Reduces user cost in machine safety controller designs that must comply with EN/IEC 62061 up to SIL 3, EN ISO 13849-1 up to PL e, EN 954-1 category 3 and EN 81-1 for elevators
• Eliminates one or more power contactors
• Eliminates feedback checking arrangement
• Drive can be powered continuously

Safe Torque Off can form part of an EN 954-1 Category 4 system by adding additional control circuitry.

Biến tần Emerson Commander SK|Bán Biến tần Emerson

Biến tần Emerson Commander SK Series là dòng biến tần thông dụng,tương thích với rất nhiều trong thực tế với nhiều tính năng điều khiển thông minh, truyền thông mạnh mẽ. Commander SK sẽ vượt ngoài sự mong đợi của Quý khách hàng.

Biến tần Emerson Commander SK

Thông số kỹ thuật Biến tần Emerson SK

0.25kW – 132kW (0.33hp – 200hp)

100V / 200V / 400V / 575V / 690V

>>>Download User manual Commander SK

Commander SK is easy to use and offers great value. The drive modules are compact and offer excellent motor control. With onboard intelligence, I/O, Ethernet and fieldbus communications options, Commander SK allows you to do far more than you would expect from a standard open loop drive.

• Automatic no-spin autotune for rapid performance optimization
• 8 preset speeds available for greater application flexibility
• Keypad access to all parameters – basic and advanced menus
• Open loop vector control. Speed or Torque control
• Speed reference input: 0-10V, 0-20mA, 4-20mA (-10V to +10V SM-I/O Lite option)
• Switching frequency from 3kHz up to 18kHz – quiet motor operation
• Output frequency from 0 to 1500 Hz
• Linear and S type acceleration and deceleration ramps
• Modbus RTU RS485 via RJ45 connector as standard
• DC injection braking as standard
• Dynamic braking transistor as standard
• Energy savings with dynamic motor flux V/Hz
• Fan and pump energy optimization with quadratic motor flux V/Hz
• Advanced standard software features, such as timers,thresholds, maths blocks, logic operators, PID controller and kW/h meter

Inputs and outputs*

Standard Inputs and Outputs	I/O Default Function	Rating	Quantity
Digital Inputs	Enable / ResetRun Forwards Run Reverse Local Remote Speed Reference	24V	4
Digital Outputs	Zero Speed	24V	1
Relay Outputs	Drive Healthy	Normally open contact	1
Analog Input 1	Local Speed Reference	0 – 10V	1
Analog Input 2	Remote Speed Reference	0-20mA or 4-20mA	1
Analog Output	Motor Speed	0 – 10V	1

* I/O functions shown are default European settings, other functions are configurable. I/O can be expanded through option modules.

Environmental safety and electrical conformance

• IP20 (NEMA 1)
• Conduit kits available for wall mounting
• Ambient temperature -10°C to 40°C
• Electromagnetic Immunity complies with EN61800-3, EN61000-6-1 and EN61000-6-2
• Humidity 95% maximum (non-condensing)
• Electromagnetic Emissions complies with EN61800-3 (second environment) as standard. Complies with EN61000-6-3 (residential) and EN61000-6-4 (industrial) generic standards with optional footprint EMC filter