Biến tần QMA Q9000 | Biến tần QMA Q-9000

Bien tan QMA 9000, QMA Q9000, Ban bien tan QMA, Cung cap bien tan QMA 9000, Sua chua bien tan QMA 9000, Biến tần QMA 9000, Biến tần QMA 9000 giá rẻ, Sửa chữa biến tần QMA 9000

Biến tần QMA 9000

Bien tan QMA 9000

Sơ đồ đấu nối Biến tần QMA 9000

Biến tần QMA 9000

>>> DOWNLOAD HƯỚNG DẪN SỬ DỤNG BIẾN TẦN QMA Q-9000 (45 MB)

[INTRODUCTION]

Q9000 Series is a kind of high performance universal vector control inverter. Current vector technology and advanced modern control theory are used to provide more torque in operation at low speed and achieve high performance dynamic control. There are four control modes to select. Even without PG vector control, it can obtain a high torque and failure-free operation from a low speed at 1%; While with PG control, it can easily obtain high torque operation at 0 speed, which is the ideal choice for you to improve the quality and productivity.

[FEATURES]

Perfect Current Vector Control
By means of simultaneously controlling the primary current and its phase, the magnetic field current and torque current can be controlled respectively and individually to obtain a smooth run, a speed control and torque control with high torque and high precision at a very low speed

Various Control Functions
PID control, slip compensation function, speed search, over/lower torque detection and energy-saving operation control function

Excellent Torque Characteristics
Even if without PG, a high torque of 150%/0.5Hz can be reached

Powerful Braking Function
Powerful braking function can be fulfilled with built-in braking units for the inverter below 15kw and external braking resistors for that above 15kw

Hi-efficiency Energy-saving control
Wonderful energy-saving function beyond imagination, the hi-efficiency energy-saving control reaches the maximum effect in theory

Low Noise Operation
High carrier frequency SPWM modulation type may greatly suppress the noise, which is especially suitable for the place with limitation for noise.

Perfect Power Ultraharmonics Suppression Countermeasures
Built-in DC reactor for the purpose of improving power factors is equipped for all series of 55kw and above; DC reactor wiring terminal is reserved for the units below 55KW for your choice of DC reactor to reduce the interference of the ultraharmonics of power.

[OTHER FUNCTIONS]
* Powerful Q9000 may satisfy various needs of different users
* Standard built-in PID feedback control may provide a precise closed loop control
* V/F separation and free V/F image function may fully meet any special requirements of various motors
* Powerful autotuning function enables all kinds of motors to run effectively
* Whatever precise machinery or multi-motor operation, there are four control modes combined closely to fulfill best running
* High torque at low speed and smooth acceleration/deceleration in whole frequency domain
* Simple and flexible operation is suitable for various operating conditions
* Expanding function applies to stand-alone or network
* Independent programming satisfies any special requirements of the customers well.
* The built-in PG card is suitable for incremental encoder of any brands, including HEIDENHAN, NEMICON, etc
* Self-check protection function will give out corresponding fault indication and stop the output of the inverter at the same time when the parameter is not correct.
* It can run by autotuning of the inverter that may measure the distance between two sections automatically
* The operation of the inverter can be counted and controlled by the velocity curve to obtain rectilinear stop and high positioning precision
* The speed signal supports multiple speed control and analog signal control
* Vibration at high speed or low speed can be compensated
* S running curve and the startup time or stop time for deceleration or deceleration can be set freely
* Easy to install and debugging and compatible with Yaskawa series inverter, which can be replaced directly

Bán biến tần QMA Q9000 | Sửa biến tần QMA Q-9000

Bien tan QMA 9000, QMA Q9000, Ban bien tan QMA, Cung cap bien tan QMA 9000, Sua chua bien tan QMA 9000, Biến tần QMA 9000, Biến tần QMA 9000 giá rẻ, Sửa chữa biến tần QMA 9000

Biến tần QMA 9000

Bien tan QMA 9000

Sơ đồ đấu nối Biến tần QMA 9000

Biến tần QMA 9000

>>> DOWNLOAD HƯỚNG DẪN SỬ DỤNG BIẾN TẦN QMA Q-9000 (45 MB)

[INTRODUCTION]

Q9000 Series is a kind of high performance universal vector control inverter. Current vector technology and advanced modern control theory are used to provide more torque in operation at low speed and achieve high performance dynamic control. There are four control modes to select. Even without PG vector control, it can obtain a high torque and failure-free operation from a low speed at 1%; While with PG control, it can easily obtain high torque operation at 0 speed, which is the ideal choice for you to improve the quality and productivity.

[FEATURES]

Perfect Current Vector Control
By means of simultaneously controlling the primary current and its phase, the magnetic field current and torque current can be controlled respectively and individually to obtain a smooth run, a speed control and torque control with high torque and high precision at a very low speed

Various Control Functions
PID control, slip compensation function, speed search, over/lower torque detection and energy-saving operation control function

Excellent Torque Characteristics
Even if without PG, a high torque of 150%/0.5Hz can be reached

Powerful Braking Function
Powerful braking function can be fulfilled with built-in braking units for the inverter below 15kw and external braking resistors for that above 15kw

Hi-efficiency Energy-saving control
Wonderful energy-saving function beyond imagination, the hi-efficiency energy-saving control reaches the maximum effect in theory

Low Noise Operation
High carrier frequency SPWM modulation type may greatly suppress the noise, which is especially suitable for the place with limitation for noise.

Perfect Power Ultraharmonics Suppression Countermeasures
Built-in DC reactor for the purpose of improving power factors is equipped for all series of 55kw and above; DC reactor wiring terminal is reserved for the units below 55KW for your choice of DC reactor to reduce the interference of the ultraharmonics of power.

[OTHER FUNCTIONS]
* Powerful Q9000 may satisfy various needs of different users
* Standard built-in PID feedback control may provide a precise closed loop control
* V/F separation and free V/F image function may fully meet any special requirements of various motors
* Powerful autotuning function enables all kinds of motors to run effectively
* Whatever precise machinery or multi-motor operation, there are four control modes combined closely to fulfill best running
* High torque at low speed and smooth acceleration/deceleration in whole frequency domain
* Simple and flexible operation is suitable for various operating conditions
* Expanding function applies to stand-alone or network
* Independent programming satisfies any special requirements of the customers well.
* The built-in PG card is suitable for incremental encoder of any brands, including HEIDENHAN, NEMICON, etc
* Self-check protection function will give out corresponding fault indication and stop the output of the inverter at the same time when the parameter is not correct.
* It can run by autotuning of the inverter that may measure the distance between two sections automatically
* The operation of the inverter can be counted and controlled by the velocity curve to obtain rectilinear stop and high positioning precision
* The speed signal supports multiple speed control and analog signal control
* Vibration at high speed or low speed can be compensated
* S running curve and the startup time or stop time for deceleration or deceleration can be set freely
* Easy to install and debugging and compatible with Yaskawa series inverter, which can be replaced directly

Bien tan QMA Q9000 | Cung cap bien tan QMA Q-9000 gia re

Bien tan QMA 9000, QMA Q9000, Ban bien tan QMA, Cung cap bien tan QMA 9000, Sua chua bien tan QMA 9000, Biến tần QMA 9000, Biến tần QMA 9000 giá rẻ, Sửa chữa biến tần QMA 9000

Biến tần QMA 9000

Bien tan QMA 9000

Sơ đồ đấu nối Biến tần QMA 9000

Biến tần QMA 9000

>>> DOWNLOAD HƯỚNG DẪN SỬ DỤNG BIẾN TẦN QMA Q-9000 (45 MB)

[INTRODUCTION]

Q9000 Series is a kind of high performance universal vector control inverter. Current vector technology and advanced modern control theory are used to provide more torque in operation at low speed and achieve high performance dynamic control. There are four control modes to select. Even without PG vector control, it can obtain a high torque and failure-free operation from a low speed at 1%; While with PG control, it can easily obtain high torque operation at 0 speed, which is the ideal choice for you to improve the quality and productivity.

[FEATURES]

Perfect Current Vector Control
By means of simultaneously controlling the primary current and its phase, the magnetic field current and torque current can be controlled respectively and individually to obtain a smooth run, a speed control and torque control with high torque and high precision at a very low speed

Various Control Functions
PID control, slip compensation function, speed search, over/lower torque detection and energy-saving operation control function

Excellent Torque Characteristics
Even if without PG, a high torque of 150%/0.5Hz can be reached

Powerful Braking Function
Powerful braking function can be fulfilled with built-in braking units for the inverter below 15kw and external braking resistors for that above 15kw

Hi-efficiency Energy-saving control
Wonderful energy-saving function beyond imagination, the hi-efficiency energy-saving control reaches the maximum effect in theory

Low Noise Operation
High carrier frequency SPWM modulation type may greatly suppress the noise, which is especially suitable for the place with limitation for noise.

Perfect Power Ultraharmonics Suppression Countermeasures
Built-in DC reactor for the purpose of improving power factors is equipped for all series of 55kw and above; DC reactor wiring terminal is reserved for the units below 55KW for your choice of DC reactor to reduce the interference of the ultraharmonics of power.

[OTHER FUNCTIONS]
* Powerful Q9000 may satisfy various needs of different users
* Standard built-in PID feedback control may provide a precise closed loop control
* V/F separation and free V/F image function may fully meet any special requirements of various motors
* Powerful autotuning function enables all kinds of motors to run effectively
* Whatever precise machinery or multi-motor operation, there are four control modes combined closely to fulfill best running
* High torque at low speed and smooth acceleration/deceleration in whole frequency domain
* Simple and flexible operation is suitable for various operating conditions
* Expanding function applies to stand-alone or network
* Independent programming satisfies any special requirements of the customers well.
* The built-in PG card is suitable for incremental encoder of any brands, including HEIDENHAN, NEMICON, etc
* Self-check protection function will give out corresponding fault indication and stop the output of the inverter at the same time when the parameter is not correct.
* It can run by autotuning of the inverter that may measure the distance between two sections automatically
* The operation of the inverter can be counted and controlled by the velocity curve to obtain rectilinear stop and high positioning precision
* The speed signal supports multiple speed control and analog signal control
* Vibration at high speed or low speed can be compensated
* S running curve and the startup time or stop time for deceleration or deceleration can be set freely
* Easy to install and debugging and compatible with Yaskawa series inverter, which can be replaced directly

Biến tần QMA Q9000 | Bien tan QMA Q-9000

Bien tan QMA 9000, QMA Q9000, Ban bien tan QMA, Cung cap bien tan QMA 9000, Sua chua bien tan QMA 9000, Biến tần QMA 9000, Biến tần QMA 9000 giá rẻ, Sửa chữa biến tần QMA 9000

Biến tần QMA 9000

Bien tan QMA 9000

Sơ đồ đấu nối Biến tần QMA 9000

Biến tần QMA 9000

>>> DOWNLOAD HƯỚNG DẪN SỬ DỤNG BIẾN TẦN QMA Q-9000 (45 MB)

[INTRODUCTION]

Q9000 Series is a kind of high performance universal vector control inverter. Current vector technology and advanced modern control theory are used to provide more torque in operation at low speed and achieve high performance dynamic control. There are four control modes to select. Even without PG vector control, it can obtain a high torque and failure-free operation from a low speed at 1%; While with PG control, it can easily obtain high torque operation at 0 speed, which is the ideal choice for you to improve the quality and productivity.

[FEATURES]

Perfect Current Vector Control
By means of simultaneously controlling the primary current and its phase, the magnetic field current and torque current can be controlled respectively and individually to obtain a smooth run, a speed control and torque control with high torque and high precision at a very low speed

Various Control Functions
PID control, slip compensation function, speed search, over/lower torque detection and energy-saving operation control function

Excellent Torque Characteristics
Even if without PG, a high torque of 150%/0.5Hz can be reached

Powerful Braking Function
Powerful braking function can be fulfilled with built-in braking units for the inverter below 15kw and external braking resistors for that above 15kw

Hi-efficiency Energy-saving control
Wonderful energy-saving function beyond imagination, the hi-efficiency energy-saving control reaches the maximum effect in theory

Low Noise Operation
High carrier frequency SPWM modulation type may greatly suppress the noise, which is especially suitable for the place with limitation for noise.

Perfect Power Ultraharmonics Suppression Countermeasures
Built-in DC reactor for the purpose of improving power factors is equipped for all series of 55kw and above; DC reactor wiring terminal is reserved for the units below 55KW for your choice of DC reactor to reduce the interference of the ultraharmonics of power.

[OTHER FUNCTIONS]
* Powerful Q9000 may satisfy various needs of different users
* Standard built-in PID feedback control may provide a precise closed loop control
* V/F separation and free V/F image function may fully meet any special requirements of various motors
* Powerful autotuning function enables all kinds of motors to run effectively
* Whatever precise machinery or multi-motor operation, there are four control modes combined closely to fulfill best running
* High torque at low speed and smooth acceleration/deceleration in whole frequency domain
* Simple and flexible operation is suitable for various operating conditions
* Expanding function applies to stand-alone or network
* Independent programming satisfies any special requirements of the customers well.
* The built-in PG card is suitable for incremental encoder of any brands, including HEIDENHAN, NEMICON, etc
* Self-check protection function will give out corresponding fault indication and stop the output of the inverter at the same time when the parameter is not correct.
* It can run by autotuning of the inverter that may measure the distance between two sections automatically
* The operation of the inverter can be counted and controlled by the velocity curve to obtain rectilinear stop and high positioning precision
* The speed signal supports multiple speed control and analog signal control
* Vibration at high speed or low speed can be compensated
* S running curve and the startup time or stop time for deceleration or deceleration can be set freely
* Easy to install and debugging and compatible with Yaskawa series inverter, which can be replaced directly

Bien tan QMA Q-5000, Biến tần QMA Q5000, Bán biến tần QMA Q-5000

Biến tần QMA Q5000, Biến tần QMA Q-5000, Bien tan QMA Q-5000, Biến tần QMA Q5000, Bán biến tần QMA Q-5000, Sửa biến tần QMA

Biến tần QMA Q-5000

Bien tan QMA Q-5000

Sơ đồ đấu nối Biến tần QMA Q-5000

Biến tần QMA Q-5000

>>> DOWNLOAD HƯỚNG DẪN SỬ DỤNG BIẾN TẦN QMA Q-5000

[INTRODUCTION]

Q-5000 SERIES Hi-Performance Low-noise Mini Vector Inverter is a new-type mini-AC inverter but packed with high performance features for induction motors available from 0.4-2.2kw which is the ideal solution to variable speed.

Q-5000 is featured for SPWM design which provides low noise and high start torque. The inverter is independent and used in 50/60Hz (±5% fluctuation is allowable). The current overload rating is 150% for 60 seconds, sensorless vector control and V/F control make this inverter more brilliant for most general applications.

Q5000 is feature-packed, low cost and compact. The high-speed current limiting function minimizes over-current trips. Inrush current suppression plus grounding protection are built in for safe and trip free operation.

Q-5000 is innovative design features; the digital operator includes a 3-digit LED status display. The multi-speed step function (7 pre-set speeds) and 4 acceleration/deceleration time make it ideal for food processing and its smooth speed variation can bring energy savings in fan and pump operation.

Q-5000 also have multi-function I/O terminals, 0-10V, 4-20mA inputs and analog output, plus lip compensation, over torque detection and high speed search which all make this highly specified inverter a particular versatile inverter.

RS-485 Modbus serial communication port supports net work which is convenient for variety of host link allowing 32 nodes on a single net work.

Q-5000 is proficient for conveyors, grinders, centrifuges, pumps, fans, and blowers used in material handling, packaging, food processing, and commercial laundry etc.

Q-5000 is a perfect choice for high performance and low cost. Trust it for your success.

 

[FEATURES]
*Without PG Vector Control (SVC), V/F control.
*Fulfill high torque and failure-free operation from a 1% low speed.
*Carrier frequency reaches 15 kHz.
*Built-in PID, multiple protective functions, safe and guaranteed.
*Potentiometer for frequency regulation is configured as standard.
*Automatic energy-efficient enables the motor to run in a high-efficiency and energy-saving way.
*RS-485 communication interface and standard MODBUS communication protocol are adopted.
*No metallic sound as that of other inverters and ultra-low noise.
*Powerful dynamic and static autotuning functions.

 

[SPECIFICATIONS]

 230V Class

 

Model Q5000-XXX-2XX		004	007	015	022
Motor rated output power (KW)		0.4	0.75	1.5	2.2
Motor rated output power (HP)		0.5	1.0	2.0	3.0
Output	Rated output capacity (KVA)	1.0	1.9	2.7	3.8
	Rated output current (A)	2.5	5.0	6.5	11
	Max. output voltage (V)	Corresponding to the input voltage
	Max. output frequency (Hz)	0.1~400Hz
Unit weight kg/Unit		1.5	1.5	1.5	1.5
Power supply	Rated input current (A)	6.3/2.9	11.5/7.6	15.7/8.8	12.5
	Single-phase unit with 3-phase input current	3.2	6.3	9.0	–
	Allowable voltage variable range	Single/three phase power		3-phase
		180~264VAC
	Allowable frequency variable	50/60Hz ± 5%

460V Class

Model Q5000- XXX-43X		004	007	015	022
Motor rated output power (KW)		0.4	0.75	1.5	2.2
Motor rated output power (HP)		0.5	1.0	2.0	3.0
Output	Rated output capacity (KVA)	1.0	2.3	3.1	3.8
	Rated output current (A)	2.0	3.0	4.2	5.5
	Max. output voltage (V)	Corresponding to the input voltage
	Max. output frequency (Hz)	0.1~400Hz
Unit weight kg/Unit		1.5	1.5	1.5	1.5
Power supply	Rated input current (A)	2.5	4.2	5.7	6.0
	Single-phase unit with 3-phase input current	–	–	–	–
	Allowable voltage variable range	3-phase power
		342~528VAC
	Allowable frequency variable	50/60Hz ± 5%

 

Control characteristics	Control methods			SPWM mode of sinusoidal wave (carrier frequency 1KHz~15KHz)/(Sensorless Vector Control)
	Output frequency resolution			0.1Hz
	Torque characteristics			Torque compensation and slip compensation. Starting torque can be more than 150% in 0.5Hz.
	Overload tolerance			150% of rated output current for 1 min.
	Accel/decel time			0.1~600s (can be set individually)
	V/F curve			Any V/F curve setting
	Stalling prevention			Set as rated current percentage, 50~200%
Operation characteristics	Frequency setting signal	Digital operator		Set by
		External signal		Potentiometer 5KΩ/0.5W, DC0~+10V (input impedance 47 KΩ) 4~20mA (output impedance 250 KΩ), serial communication RS485 multi-function input options 1~5 (7 bands speed, inching, up/down commands)
	Operation setting signal	Digital operator		Set by RUN and STOP keys
		External signal		Multi-function operation mode, serial communication MODBUS (RS485)
	Multi-function input signal	Multi-band speed command 1~7 options, inching command, acceleration/deceleration prohibition command, first/acceleration and deceleration switching command, counter, programmable operation, external B.B, first/second frequency source option, increase/decrease frequency terminal setting
	Multi-function output signal	In operation, operating frequency reach, set frequency reach, zero speed, in B.B, faults indication, Local/Remote indication, counting value reach indication, programmable operation
	Analog output signal				Analog frequency/current signal output
Other functions	Carrier frequency regulation, s curve, abnormal record checking, acceleration/deceleration auto regulation, over-current stall prevention, over-voltage stall prevention, reverse prohibition setting AVR function, reboot after momentary power loss, parameter lock/reset, power-efficient operation, PID feedback control, DC braking initial frequency setting, frequency upper and lower limit setting, serial communication RS485, DC braking, sleep/wake function, simple positioning function
Protection functions			Over-voltage, over-current, low voltage, overload limitation, electronic heating relay, overheat self measuring, grounding protection, faults contacts.
Cooling methods			Forced air cooling
Environment	Service site		With height below 1000m, indoor (no corrosive gas, liquid and dust)
	Ambient temperature			-10℃~50℃ (no condensation or frost)
	Storage temperature			-20℃~60℃
	Humidity			Below 90%RH (no condensation)
	Vibration			Below 20Hz 9.80665m/s2 (1G)~50Hz 5.88m/s2 (0.6G)
Remark: 3-phase unit can not be input by single-phase power, otherwise, the service life and the characteristics of the inverter will be affected.

 

Biến tần QMA Q7000, Bien tan QMA Q-7000, Bán biến tần QMA

Bien tan QMA Q7000, Biến tần QMA Q-7000, Cung cấp linh kiện và sửa chữa biến tần QMA Q-7000, Biến tần giá rẻ

Biến tần QMA Q7000:

Bien tan QMA Q-7000

Sơ đồ đấu nối:

Sơ đồ đấu nối biến tần QMA Q-7000

 

>>> DOWNLOAD HƯỚNG DẪN SỬ DỤNG BIẾN TẦN QMA Q-7000 (19.54 MB)

[INTRUDUCTION]

Q-7000 series of brilliant inverters for operation of elevators and escalators are designed to have a lot of exclusive features including Q-7000-EC especially for escalator, Q-7000-EL and Q-7000-IP especially for elevator.

Q-7000 series are all the type adopting IGBT’s PWM control and current vector control, V/F control. Q-7000 series have the function such as connection-point-memory & DC0-10V EASY TUNING, loading compensation for start-up torque, and manual vernier adjustment correcting. High efficiency and safe function, 300% torque compensation. Monitor torque compensation output of the inverter at anytime so as to reduce the shocking the elevator during running. The series of products has easy tuning function to the motor parameters and are complied with the regulation of GB, with braking unit (for≤45kw) and speed feedback unit.

Q-7000-EC is for open loop control without built in PG card, especially used for escalator with brilliant performance by long life design and support RS-485 communication port.

Q-7000-EL is used for geared asynchronous motor. PG card is built in for customer to realize the high fine speed control. Q-7000EL support standalone signal, frequency division, isolated signal, and open collector output functions for Encoder. 200% of rated current for 10 seconds. Speed control accuracy is nominal 1:100 and could reach 1:1000 with PG.

Q-7000 IP is used for gearless synchronous motor. It also support standalone single, frequency division, isolated signal and open collector output functions for Encoder. Q-7000IP supports Line drive 8192 C/T. Its ultra-slim design is adequate for machine room-less elevator. It combines 32- digit vernier-adjustment current vector control and stochastic PWM control. The ultra-low noise, with adjustable wave frequency, carrier frequency 2k-15k is adjustable.

All of Q-7000 series support the RS-485 communication port and other more functions that customers would find most necessary in elevator controls to provide an inverter that delivers performance which fits the elevator systems.

 

[FEATURES]

Q7000-EC inverter Special for Escalators

*Adopt IGBT’s PWM control
*Current vector control, V/F control
*Built-in connection-point-memory & DC0-10V EASYTUNING, loading compensation for start-up torque and manual vernier-adjustment correcting function
*With high efficiency and safety function, 300% torque compensation, and monitor the torque compensation output of the inverter at any moment
*With EASYTUNING function of the motor parameters
*The series of products are complied with the regulation of GB, with built-in braking unit (for≤45kw )
*Built-in speed feedback unit

 

Q7000-EL Asynchronous inverter Special for Elevator

*Adopt IGBT’s PWM control
*Current vector control, V/F control
*Support standalone signal, frequency division, isolated signal, and open collector output functions for ENCODER
*Built-in connection-point-memory & DC0-10V EASYTUNING, loading compensation for start-up torque and manual vernier-adjustment correcting function
*With high efficiency and safety function, 300% torque compensation, reducing the vibration of the elevator during its running.
*With EASYTUNING function of the motor parameters
*The series of products are complied with the regulation of GB, and with built-in braking unit (for≤45kw )
*Built-in speed feedback unit

 

Q7000-IP Synchronous inverter Special for Elevator

*Current vector control, V/F control
*Support standalone signal, frequency division, isolated signal, and open collector output functions for ENCODER
*Self-correcting compensation function for start-up torque and manual vernier-adjustment correcting, improving the comfort of elevator
*Support LIN DRIVE 8192C/T
*Ultra-slim design is adequate for room-less elevator
Multiple modes enable the control more precise, including jog control, speed adjustment, and analog speed control etc
*Combine 32-digitcurrent vector control of vernier-adjustment with stochastic PWM control
*Ultra-low noise, with adjustable wave frequency, carrier frequency of 2 KHz-15 KHz adjustable
*With built-in braking unit (for≤45kw )
*Built-in speed feedback unit

Bien tan QMA Q-8000, Biến tần QMA Q-8000, Bán- Sửa biến tần QMA Q-8000

Bien tan QMA Q8000, Biến tần QMA Q-8000, bán biến tần QMA Q-8000, Sửa chữa biến tần QMA Q-8000

Biến tần QMA Q-8000:

Bien tan QMA Q-8000

 

• Square torque curve special for blower and water pump
• Adjustable V/F operating mode
• New-generation of IGBT application, high switching frequency reduces noise effectively
• RS485 port and MODBUS communication protocol are flexible for various connections.
• With autotuning function and can be operated in current vector.
• Stall prevention function ensures the system safety effectively.

>>> DOWNLOAD HƯỚNG DẪN SỬ DỤNG BIẾN TẦN QMA Q-8000